1、金属屋面搭接处:
1, metal roof lap:
金属屋面搭接处先涂一层抗紫外线纯丙烯酸涂料，在其仍为湿润时，把15～20厘米宽的防水聚酯布嵌入其间，再从上面用美莎纯丙烯酸屋顶防水涂料充沛润泽防水聚酯布，以致全干。
Metal roof joint first coated with a layer of anti ultraviolet acrylic paint, it is still in the wet, 15 to 20 cm wide sewing polyester cloth embedded therein, and from above with acrylic waterproof paint and plenty of moisture sewed polyester cloth, so that the whole stem.
2、金属屋面的异物（如烟囱、出气孔、风机口等）:裁剪尺度、外形适宜的防水聚酯布，并按技能请求裁剪好网站价格，在卓异物四周涂一丙烯酸屋顶防水涂料，把裁剪好的防水聚酯布铺于其上（成都人事考试信息网），再从上面用美莎丙烯酸屋顶防水涂料充沛润泽防水聚酯布，保证不起泡、不起皱。
2, outstanding metal roof (such as chimneys, vents, fan mouth etc.): cut the size and shape suitable for sewing polyester cloth, and according to the request in good cutting skills, outstanding surroundings with acrylic waterproof paint, cut good sewing polyester cloth on it, and then from the using acrylic waterproof paint and plenty of moisture sewed polyester cloth, ensure no foaming, wrinkle.
3、金属屋面固件：用10㎝×10㎝的防水聚酯布，按上述相同的办法处理。
3, metal roof firmware: with 10 cm * 10 cm of the sewing polyester cloth, processing according to the same method.
4、金属屋面天沟：天沟搭接缝, 落水口等处先用金属屋面屋顶防水系统进行部分屋顶防水处理，然后在更大屋顶防水规模涂一层丙烯酸屋顶防水涂料, 在其仍为湿润时铺上缝织聚酯布, 再从上面用丙烯酸屋顶防水涂料充沛润泽缝织聚酯布, 以致全干. 最少12小时后, 最终再涂一层丙烯酸屋顶防水涂料.
4, the metal roof gutter: gutter joint, water hole at the first part of waterproof treatment for metal roof waterproofing system, and in the larger scale waterproof coating a layer of acrylic waterproof coating, it is still in the wet covered sewing polyester cloth, and then from the above acrylic waterproof paint and plenty of moisture polyester sewing dry cloth, so that at least 12 hours after the final, then coated with a layer of acrylic waterproof paint.
